Payment & Shipping Terms:
|Material:||TC+Cobalt||Key Word:||Cemented Carbide Cross Tips For Garden Cutting Tools|
tungsten carbide tips for SDS hammer bit in garden cutting tools YG8 wear resistance long lifetime
High Quality TC Cemented carbide Cross Tips SDS Electric Hammer Drill Bits
|Grade||g/cm3||TRS||Hardness||Performance & application recommended|
|YG4C||15.1||1800||90||Mainly used as small buttons for percussion bits to cut soft and medium hard formations.|
|YG6||14.95||1900||90.5||For coring crowns, electric coal drill bits, coal cutting picks, oil cone bits and scraping knife bits, used in geological prospecting, coal mining and oil well boring.|
|YG8||14.8||2200||89.5||For coring crowns, electric coal drill bits, coal cutting picks, oil cone bits and scraping knife bits, used in geological prospecting, coal mining and oil well boring.|
|YK05||14.95||2500||90.5||Mostly used as the buttons of small and medium sized percussion bits and as the inserts of rotary prospecting bits to cut soft and medium hard formations.|
|YK15||14.6||2450||87.6||Suitable to strips, conical buttons for rotary percussion-resistant, geological prospection buttons, cut soft and medium hard formations.|
|YK20||14.4||2500||86.8||Primarily for the buttons and inserts of rotary percussion bits to cut medium-hard and hard formations.|
|YK25||14.4||2550||87.2||Primarily for the buttons and inserts of rotary percussion bits to cut medium-hard and very hard formations.|
|YG11C||14.4||2700||86.5||Largely for the inserts and buttons of percussion bits and tricone bits to cut medium-hard, hard, and very hard formations.|
|YG13C||14.2||2850||86||Primarily for the buttons of tricone bits and inserts of rotary percussion bits to cut hard and very hard formations.|
For oil cone drill bits, for medium soft and medium-hard rocks.
It is used in garden tools--drill bits in cutting for garden
Production and test of TC carbide cross tips four heads
1, After the order is confirmed,TC carbide cross tips will start to prepare the RTP powder as per customer’s requirement with our wet-grinding machine
2, Before mass production, we need to do a trial pressing and sintering using every mould, and we check the appearances and the sizes of the samples with micrometer, projectors etc. to ensure that the requirements of the drawings can be met before batch production
3, Bulk production ,press the raw materials to shape blanks,and all TC carbide cross tips must be passed by semi finished inspection.
4, Then sinter blanks to finish (HIP) and finished products inspection, we have 10 sets of vacuum sintering furnace and 2 sets of HIP in the factory ensure the best quality and production capacity.
Packing and delivery of TC carbide cross tips
step 1, wrapped TC carbide cross tips in paper to avoid TC carbide cross tips to broke
step 2, put the TC carbide cross tips in inner small carton box
step 3, put the inner box into outter carton and fill the carton with foamed plastic
step 4, wrap the carton with packaging tape
step 5, you can choose any delivery way such as DHL,TNT,UPS ect.
Feel free to contact me if any needs:
zhuzhou mingri cemented carbide co. ltd