Payment & Shipping Terms:
|Keyword:||Tungsten Carbide Pin||Material:||100% Raw Material|
|Usage:||Drwaing Steel Tubes And Rods||Component:||WC+CO|
|Tolerance:||As Per Your Requirment||Surface:||Polish|
|Products Name:||Tungsten Carbide Pin|
Tungsten Carbide Cold Heading Die/pellet/pin For Bearing Industries , good wear resistance
Specification of tungsten carbide pin
1. Size: We have hundreds of moudles available now.Different sizes offered.
2. High wear&corrosion&abrasive resistance.
3. Advanced producing equipment.
4. ISO9001:2008,ISO9001:14001 certificated.
5. YG11 YG15 YG20 YG16C YG18C YG20C YG22C YG25C YG25 grades available.
6. Types: dies for drawing metal wires, rods, tubes, plugs and non-standard dies.
Application of tungsten carbide pin
The tungsten carbide heading dies are used for cold punching and heading of srews and nuts, with high wear resistance and high toughness. Also, it is the ideal material in making non-ferrous metal, ferrous metal and other alloy.
Decription of tungsten carbide pin
Carbide cold heading die is one of the main applications of tungsten carbide material. Heading dies usually can be divided into punching die and bushing die , used in cold heading, warm heading and hot heading technology situation.
|Grade||Density g/cm3||Hardness HRA||T.R.S MPa||Performance&application recommended|
|YG11||14.4||88.5||2420||Forming or stamping dies for metal powders and nonmetal powders|
|YG15||14||87||3000||It is suitable for drawing steel tubes and rods under high compression ratio,manufacturing upsetting,punching and stamping tools under large stress|
|YG20||13.5||85.5||2800||It is suitable for manufacturing punching dies for watch parts,leaf spring of musical instrument,battery jars,small sized steel balls,screws,screw caps,etc|
|YG16C||13.9||85||2750||It is suitable for impact-resistant forging dies|
|YG18C||13.7||84||2800||It is suitable for impact-resistant forging dies,hot-forging dies and finishing rollers|
Other grades and sizes can be offered as per customers' requirements
Production and test of tungsten carbide pin
1, Soon after the order is confirmed, tungsten carbide pin products will start to prepare the RTP powder as per customer’s requirement with our wet-grinding machine
2, Before mass production, we need to do a trial pressing and sintering using every mould, and we check the appearances and the sizes of wear piece carbide strips samples with micrometer, projectors etc. to ensure that the requirements of the drawings can be met before batch production
3, Bulk production ,press the raw materials to shape blanks,and all tungsten carbide pin blanks must be passed by semi finished inspection,
4, Then sinter blanks to finish (HIP) and finished products inspection, we have 10 sets of vacuum sintering furnace and 2 sets of HIP in the factory ensure the best quality and production capacity.
Zhuzhou Mingri Tungsten Carbide Co., Ltd. was established in May of 2001 with the investment of RMB 40 million. We have up-to-date production machine line and a lot of technicians.
Zhuzhou MingRi Cemented carbide co.,ltd is located in the tungsten carbide hometown , convenient transportation, from changsha airport just 40 minutes, wuhan just 1.5 hour, from guangzhou just 2 hours. A favorable peripheral environment for cemented carbide manufacturing provides a natural barrier. Convenient traffic for tomorrow's internationalization laid a wide road.