Payment & Shipping Terms:
|Features:||High Hardness,Good Impact Resistance,High Wear Resistance||Material:||WC+Cobalt|
|Grade:||MR020/MR030||Application:||For Cutting Corrugated Paper|
|Surface Treatment:||Polishing||Size:||260*158*1.3mm With 8 Holes|
|Character:||With Holes Or Without|
Advantages of Mirror Polished Cemented Tungsten Carbide Circle Disc Cutter blade for cutting Paper
1, Focusing on manufacturing tungsten carbide products over 19 years.
2, Specialist manufacturer equipped with advanced processing machines and over160 technicians.
3, Over 50 tons/month productivity to assure sustainable supply of products
4, Owing mould workshop to design & produce moulds for nonstandard products, and with mould
stocks over 10 thousand sets for different products.
5, Full ability to accept OEM & ODM orders.
6, Stringent quality control and quality consistency.
7, Professional mechanical & chemical inspecting labs to control the quality of raw material and inspect physical & mechanical properties of finished products.
Our blades are used for corrugated carton slitter scorer machine,cardboard slotting machine,carton printing machine etc.They can be made by tungsten carbide with long life working time.We have all standard size and also can customized as customers' requirements.
In addition,we can provide the grinding wheel for the blade,slotting blade and others blade used for carton ,tobacco machinery.
Grade and Applications:
|Properties & Applications||
Fine grain alloy, good wear resistance. It is suitable for machining the chilled cast iron, nonferrous metal and its alloy. It is also suitable for semifinishing and finishing the hardened steel and alloy steel.
High wear resistance and bending strength, suitable for disc cutters in electronics industry.
Higher strength, impact and shock resistance than SH6A, but lower in wear resistance and cutting speed. It is suitable for rough machining cast iron, nonferrous metal
It is suitable for rough machining cast iron, nonferrous metal and its alloy as well as non metallic materials at low cutting speed.
Fine grain alloy with good wear resistance. It is suitable for machining hard wood, plywood,PCB, PVC and metals.
Fine grade alloy . It is suitable for machining plywood, PCB, PVC,refractory alloys, stainless steel and high manganese steel etc.
|item||Common sizes OD*ID*T(mm)||Holes|
1.Mix with Cobalt powder
2. 3 sets ,All the round rods in the ball mills should be made of fine grain tungsten carbide rods,glue mixing is usually mix the rubber, make the blade sometimes mix
3.The choice of pressing machinery depends on the surface area of the product to be pressed,
surface area multiplied by 0.8 is pressure value . 1000 tons means that the maximum pressure
of 1000 tons products can be pressed, and each machine can adjust the appropriate pressure.
4.First,we will do degumming then we’ll use HIP sintering or vacuum sintering.we have 10 vacuum sintering furnace and 2 HIP furnace
We will use testing tablet when sintering to test the raw material performance .
For carbide antiskid stud,they are putting inside vaccum sintering furnace by degarmming and sintering together
For small products,normally under 200 gram,we will use degumming and sintering together in HIP sintering furnace
If for big products,for example carbide dies,plates ,Grade ML serious,we should do degumming firstly then use HIP sintering furnace
Packing and delivery:
1. Rubber protector for cutting edges, blade in bubble pack, carton case.
Max 10 pcs blades in one carton case
2. Exterior packaging: carton or wooden case
3. Other packaging upon your request
4. We also have the professional agents shipping our products to the customers.
Feel free to contact me if any needs:
zhuzhou mingri cemented carbide co. ltd